1.Type: DY-B
2.Electric power :230V
3.Weight: 1.90KG
4.Size of base:200mm×140mm
5.Using:Under Pressing
6.Steam Consumption:1.5kg/t
7.This iron is made of stainless steel and has elegant appearance,strong intensity steam,convenient operation.
Method of use
A. installation (see below)
The Largest steam pressure 0.4 Mpa
2. When connected to the steam pipe.... .
1) Use a steam pipe① to connect the steam outlet of the steam pipe ② to the steam inlet on the iron③, at the same time use another pipe ④ to connect the steam outlet ⑤of the iron to the steam outlet ⑥of the exhaust pipe.
2)Before use, turn the exhaust valve ⑦counterclockwise to clean the remaining steam and condensate.
3) Open the valve at the steam outlet of the steam pipe⑧ and let the steam heat the iron. After about 10 seconds, press or toggle the steam switch and blow air for 2-3 times, then it can be used.
3, when connected to the electric heating or fuel boiler...
1) Use a steam pipe① to connect the steam outlet of the boiler ② to the steam inlet on the iron③, at the same time use another pipe ④ to connect the steam outlet ⑤ or a separate drain tank .
2) in order to avoid leaking or vaporizing chamber condensate, can relax the steam valve to discharge part of the steam to reduce steam pressure.
4, Turning the air flow adjusting knob clockwise ⑧can reduce the amount of steam flow, counterclockwise can increase the amount of air flow.