Automatic Filling Steam Generator DL-5

Steam Generator DL-5

ELEMENT W:1500W
CAPACITY:4.5 LITRE
PRESSURE:3.5 BAR

Equipped with electric steam boiler.
Visual water level and pressure reading.
Automatical thermal regulator.
Specially designed soleplate that prevents water leak.
Suitable usage in small taylor shops,fashion designers,and dried cleaning laundry shops,
continuous usage of up to 6 hours for each time.

                                                                                           IRONING MACHINE

                                                                                          Instruction Manual

Foreword

The Instruction Manual is necessary for your correct operation of the machine . Be sure to read carefully the instruction manual and fully understand its contents before you start to use the machine . Please carefully keep this instruction manual for future necessary reference .

Requirements and Precautions

1 . Proper operation and regular maintenance of the iron are indispensable in order to use it safely in a long time . Before starting any maintenance , please read the general precautions in this manual carefully and fully understand the contents . In addition , please consult our company in case the machine is to be used for other purpose .

2 . Please attach this Instruction Manual to the machine in case of resale or tenancy of the machine . In addition , the Instruction Manual will be available upon your application to our company in case your Instruction Manual is lost .

3 . In the Instruction Manual , " Warning " symbol appears next to a point that may cause fatal accident or conflagration if users do not observe ; " Caution " symbol appears to a point that may cause mechanical damage or malfunction , or personal injury if users do not observe .

4 . Our company will not take any responsibility for any application of operation methods which are not included in the Instruction Manual , or for the cases of nonobservance of the indications of " Warning " or " Caution " .

                                                                                        Instruction for Use

1 . Wiring

Must connect with a socket provided with grounding . Make sure that the voltage complies with that shown on the machine .

2 . Water filling

This machine equipped with kettle that needs water feeding manually . Unload the safety valve ( in counterclockwise direction ) ( drawing 1 ) , filling the water by self - prepared brew basket and cup measure . The maximum capacity of this machine is 5 L . You can see the water level through the special indication window . ( drawing 8 ) . Cover the safety valve in place after filling out . Make sure that no water poured onto the machine .

3 . Machine operation

1 . ) Steam tube connection : connect the end of the steam tube with the valve ( drawing A ) , then fasten the clip tab ( drawing B ) .

2 . ) Iron connection : Connect the iron with 4 pin plug with the machine , insert it and fix plug . ( drawing C )

3 . ) Plug the power

4 . ) Turn on the power of the kettle ( drawing 4 ) , heating pilot light ( drawing 7 ) , it will take about 1 0 ~ 1 2 minutes to preheat . It shows the kettle have already reached working steam pressure when the heating pilot off . You can see the pressure by the pressure gauge .

5 . ) Within 2 ~ 3 minutes before starting to iron , turn on the power of the iron ( drawing 6 ) , adjust the temperature knob ( drawing 1 0 ) to the mark which cloth material ready to iron , press the rocker switch ( drawing 9 ) , start to steam iron .

6 . ) Steam volume can be adjusted with the electromagnetic valve on the kettle ( drawing 3 ) .

7 . ) The water in the kettle needs to be checked through the special water window during the machine operation . Wait for 1 0 - 1 5 minutes till the kettle cooled down completely after unplugging the power and close the kettle if no water , then push the safety valve ( drawing 1 ) , in counterclockwise direction , add the water slowly , re - iron accordingly after heating .

8 . ) Must tum off the switch of the kettle ( drawing 4 ) , iron power switch ( drawing 6 ) , as well as head power switch after machine working . Safety valve needs to be loosened ( drawing 1 ) to avoid pressure existed in the machine .

4 . Maintenance guide

Cut off the power and consult with a maintenance worker if machine abnormal work .

5 . Common malfunction solution

1 . ) No steam come out , however , pressure existed in the kettle

A . Check if the iron switch power turn on ( drawing 6 ) .

B . Check if the steam valve close or not ( drawing 3 )

C . Check if the power cord of the iron break or not ( drawing 1 1 ) .

D . Check if the coil of the steam valve burn out or not ( drawing 2 ) .

E . Check if the button switch of iron break or not ( drawing 9 ) .

2 . ) No steam from the kettle after kettle power energized

A . Check if water exist in the kettle or not ( drawing 8 )

B . Check if the kettle heating element break or not ( drawing 1 2 )

C . Check if the safety valve break or not ( drawing 1 ) , this is the critical part and needs to be placed or changed if problems occur .

6 . Warning :

Safety valve opening is forbidden during normal use ( drawing 1 )

Unplug the unit and release the steam till the kettle cooling down before filling the water .

This machine is not intended for other purposes

Don ' t make any flammable material close to the machine during use .

Don ' t cover with cloth when the machine energized .

Can use by the authorized adults only .

Clean action during the machine operation is forbidden .

To avoid any accidents , make sure provided a ground wire .

7 . Scale guide for the temperature dial

1 , Nylon 8 5 ' C

2、Silk fabric 116℃

3 . Woolen fabric 1 4 7 C

4、Cotton fabric 178℃

5、Linen fabric 210℃

8 . Parameterguide

Write a review