Application
Widely used in laundry and clothes factory packaging and sealing clothes with poly bag.
Features
It works to press and seal the poly bag with electromagnetic system that Functions as the suction force to close the sealing and cutting gate.It features Time set-up,pulse heater,and stainless steel blade only gentle press down the handle to fulfill the poly cutting and sealing step.The sealing effect is strong with clear embossed design;and the cutting effects smooth and neat.Easy to operate,Labor-saving and high-efficient.
Technical Data
Power Supply |
230V 50HZ |
Power |
250W |
Poly bag thickness |
0.015-0.06mm |
Poly bag Material |
PE/PP |
Poly bag Width |
≦550mm |
Dimension |
700*600*1800mm |
Weight |
54kg |
The machine is composed of the lower frame and the upper machine head. The lower frame is first assembled, as shown in figure (2)chassis,install four 5mm screws; See figure (1) casters; See figure (3) left and right vertical plates are mounted on the chassis; See figure (4) the beam is mounted with 6m screws. Install the machine head on the rack and fix it with four 6m screws;see figure (5) install the air spring; See figure (6) install handle; See figure (7) plastic clamping frame at both ends of the film roll bag is pressed into the center, and the two ends of the guide shaft are then fixed and put into the rack.
Operation:
1、Put the plastic film on the machine bracket, and fix it through the guide bar.
2、Connect the power supply and turn on the switch, hang the cloth on the hook, pull the plastic film down to package the cloth.
3、Press the upper of the sealing switch, the horizon sealing works; pressing the lower of the sealing switch, the tilted sealing works.
4、Heating time usually set to 1.8,the number start to ficker when press “time”, the unit is second, press "+" to increase, press "-" to decrease.
5、Press the handle down with your hands, and the suction electromagnet will adsorbent the pressing door, here you can release the handle and the door will come back automatically in seconds.
Notes:
The machine must have a reliable ground wire!
Do not put your hand into the door when the machine is working, there are high temperature sharp cutting knives!